The content of this webpage is automatically translated by the machine. If there is any error, please contact us to modify it. (We can only accept text communication, non-verbal communication).
f029@fujinfang.com
Hand pressing type ironing machine operation process

Operation process:

1. Plug in the power supply, turn on the main power switch, and the power indicator light will be on; (Note: the whole machine must have a suitable protective ground wire); adjust the thermostat to the required temperature (usually 130 °C-200 °C) For example, the AAA grade environmentally friendly material film temperature is generally 130 ° C -160 ° C); adjust the timer to the required time (usually about 5 to 20 seconds);

2. When the temperature of the heating plate reaches the specified temperature, firstly spread 3 to 5 layers of hot melt film on the heating plate (depending on the thickness of the film), it is best not to have bubbles when laying the flat;

3, the embroidered embroidery has a film on one side of the flat heating plate, pay attention to flatten;

4. Manually press down the pressure handle and wait until the time counts down to “0” to pull the pressure handle;

5, remove the embroidery (if there is still some hot peeling is not clean can repeat the third step 4).

Contact us
 

Tel: +86-755-88840106

Mailbox: f029@fujinfang.com

URL: http://www.fujinfang.net

WeChat

Scan QR codeClose